Using the Jet 708115K bandsaw is easy. First, make sure it's properly set up. You won't have to spend a lot of time on initial setup. Once it's ready, plug it in according to the voltage requirements (115/230V). The included 3/8 - inch, 6 TPI woodworking blade allows you to start cutting right away. For larger wood pieces, take advantage of the 6 - inch depth resaw capacity. The 15 - inch by 15 - inch offset cast - iron table gives you plenty of space to work. When using the bandsaw, always wear safety goggles to protect your eyes. Keep the area around the saw clean to avoid any obstructions. For maintenance, regularly check the blade for wear and tear. You can adjust the blade tracking easily with the single - knob adjustment. The micro - adjustable lower blade guide can be tweaked to keep the blade in optimal condition. Also, connect the 4 - inch dust port to a dust collection system with at least 300 CFM to keep the workspace clean and extend the life of the saw.
