Greenlee 885E980 1-1/4 to 4 One Shot, 5 Segment Rigid Conduit Bender with Electric Hydraulic Pump

Features: This conduit bender features strong yet lightweight portable pin - assembled aluminum parts. It comes with an easy - to - use ram travel scale and detailed charts, allowing you to make accurate bends every time. You can effortlessly create elbows, offsets, and saddles. Specifications: It is powered by an electro - hydraulic system, running on 120.00 VAC. Its capacity ranges from 1 - 1/4 inches to 5 inches. Includes: The set comes with one bender and one 980 electric hydraulic pump, providing you with a complete solution for your conduit bending needs.

Using this Greenlee conduit bender is a breeze. First, make sure the power source is connected properly with the 120VAC supply. Check the ram travel scale and refer to the charts to figure out the right settings for the bends you want, whether it's an elbow, offset, or saddle. Place the conduit in the bender at the correct position and start the electric hydraulic pump. The pump will do the work and bend the conduit accurately. When using, always wear appropriate safety gear like gloves and safety glasses. Avoid overloading the bender beyond its 1 - 1/4 to 5 - inch capacity. For maintenance, keep the aluminum components clean from dirt and debris. After each use, wipe down the bender and the pump. Check the hydraulic fluid level regularly and top it up if needed. Store the bender in a dry place to prevent rust and damage.