Explore the Greenlee 800F1725 Hydraulic Cable Bender. It comes with a 1725 foot pump, a 1/4' x 10' (6.4 mm x 3 m) high - pressure hydraulic hose unit, and a storage box. This cable bender can make one - shot bends up to 90° and automatically unloads the cable. Its compact design allows for bending in tight spaces. With the foot pump, you can keep both hands free to hold the cable. It has a capacity of 350 - 1000 kcmil (MCM) (185 - 500 mm2), 600 volt, and 350 - 750 kcmil (MCM) compact cable, and weighs 36 lbs. (16.4 kg).
Using the Greenlee 800F1725 Hydraulic Cable Bender is easy. First, place the cable in the bender. Then, use the foot pump to start the bending process. The bender will make one - shot bends up to 90° and automatically unload the cable when done. When using it, make sure to keep your hands clear of moving parts. Also, always check the cable size against the capacity of the bender (350 - 1000 kcmil (MCM) (185 - 500 mm2), 600 volt; 350 - 750 kcmil (MCM) compact cable). For maintenance, keep the bender clean and dry. Check the hydraulic hose regularly for any signs of wear or damage. If you notice any issues, replace the parts as needed. Store the bender in the provided storage box when not in use to protect it.
