DeWalt DW5431 3/8 x 16 x 18 Rock Carbide SDS Plus Hammer Bit, 2 Cutter

Dewalt DW5431 Details: • 3/8 - inch Diameter • 16 - inch Usable Length • 18 - inch Overall Length Dewalt DW5431 Advantages: • The ROCK CARBIDE tip provides more carbide - surface contact, extending the bit's lifespan. • An innovative tip stops bit - walking and boosts drilling accuracy. • Four flutes quickly clear debris, enabling fast and efficient drilling. • It can set up to 25% more anchors than regular masonry bits. • Three flats on the shank prevent it from slipping back into the chuck, ensuring your safety. • It hammers through tough aggregates with little wear or breakage.

Using the DeWalt DW5431 is straightforward. First, make sure your hammer drill is compatible with SDS Plus bits. Insert the bit into the chuck until it locks in place. When you start drilling, apply steady pressure but don't push too hard as the bit is designed to do the work. Keep the drill perpendicular to the surface for accurate holes. As for safety, always wear safety goggles and gloves. Never use the bit if it's damaged. To maintain the bit, after each use, clean off any debris from the flutes and the tip. You can use a brush or compressed air. Store the bit in a dry place to prevent rusting. With proper use and care, this bit will serve you well for a long time.