DeWalt DW5466 1 x 16 x 18 Rock Carbide SDS Plus Hammer Bit, 2 Cutter

The DeWalt DW5466 hammer drill bit is a top - notch tool for your drilling needs. Specifications: It has a 1 - inch diameter, a 16 - inch usable length, and an 18 - inch overall length. Features: The ROCK CARBIDE tip offers more surface contact with the carbide, greatly extending the bit's lifespan. Its innovative tip stops the bit from wandering, giving you more precise drilling. The four - flute design efficiently clears debris, enabling quick and effective drilling. This bit can set up to 25% more anchors than other standard masonry bits. With three flats on the shank, it won't slip back into the chuck, keeping you safe. It can hammer through the toughest aggregates with little wear or breakage.

Using the DeWalt DW5466 is easy. First, make sure your drill is compatible with SDS Plus bits. Insert the bit into the drill chuck firmly until it locks in place. When starting to drill, apply gentle pressure to prevent the bit from walking. Keep a steady hand and let the bit do the work. As you drill, the four - flute design will clear the debris for you. For best results, use this bit on hard aggregates like concrete or stone. When it comes to maintenance, after each use, clean the bit with a brush to remove any debris. Store it in a dry place to prevent rusting. Avoid using excessive force as it can cause unnecessary wear or breakage. Also, always wear appropriate safety gear like goggles and gloves when using this bit.