Greenlee DSBB-7/16-B 7/16 Manual Draw Stud

This product comes with a brochure and an operator's manual. It includes a 4-foot conduit size knockout die. Key features include easy threading, thanks to the 'dog point' tip that helps prevent cross-threading. It's suitable for 1/2-inch conduit size Slug-Buster® and Standard Round knockouts. You can use it with a KRW-1 ratchet wrench. Specifications are as follows: length, width, and height are all 3.5 inches, with a volume of 42.875 cubic inches.

Using this Greenlee manual draw stud is straightforward. First, if you're using the 4-foot conduit size knockout die that comes with it, make sure it's properly attached. When threading, the 'dog point' tip will help you avoid cross - threading, so take your time to align it correctly. For 1/2 - inch conduit size applications, whether it's Slug - Buster® or Standard Round knockouts, this stud is a great fit. You'll need a KRW - 1 ratchet wrench to operate it. As for maintenance, after each use, wipe it down to remove any debris. Keep it in a dry place to prevent rusting. If you notice any signs of wear on the threading or the tip, it might be time to check if it needs replacement.