This Greenlee EK50ML120B electromechanical crimping tool is a game - changer. It comes with (1) crimping tool in the package. With PowerSense Technology, you can securely hold your work before starting the crimp. The Intelligent Crimping System Technology keeps an eye on the amp draw for each crimp and gives a visual signal if the crimp doesn't finish a full cycle. It reduces hand force by 90%, and its crimping cycle is 65% faster than ratcheting tools. The 10.8V Li - Ion Battery can handle up to 250 crimps on a single charge. The LED battery level indicator helps you know when to recharge, and the LED work light lets you work in dark areas with ease. Once crimping is done, just release the trigger to open the jaws for the next crimp. The overmolded tacky grip area makes holding the tool comfortable. Specifications include a crimping force of 3400 lbs (15kN), a crimp cycle time of 1.3 seconds, a rubber overmold handle, a 10.8V 1.5Ah Li - Ion battery, and available 110V or 220V chargers with a 40 - minute charge time. It's battery - powered and has an overall length of 9 inches.
Using this Greenlee EK50ML120B crimping tool is easy. First, make sure the battery is charged. You can check the LED battery level indicator. Before starting a crimp, use the PowerSense Technology to hold your work firmly in place. Then, start the crimping process. The Intelligent Crimping System will monitor the amp draw. If you see a visual alert, it means the crimp didn't complete a full cycle. After crimping, simply release the trigger to open the jaws for the next task. When using the tool in dark areas, turn on the LED work light. For maintenance, keep the tool clean and dry. Avoid exposing it to extreme temperatures. If the battery is low, use the MBC110 or MBC220 charger (110V or 220V) to recharge it. It takes about 40 minutes to fully charge the 10.8V 1.5Ah Li - Ion battery. Handle the tool with care, and the overmolded tacky grip area will make it comfortable for you to hold during long - term use.
