INCLUDES: (1) Hole Cutter. This amazing hole cutter can cut 2 to 12 - inch (51 to 305 mm) holes in sheet metal. It's suitable for up to 24 - gauge steel and 26 - gauge stainless steel. With inch and centimeter measurement scales molded into the body, you can get accurate hole diameters. High - quality bearings are used, which ensure a long cutting life. It easily installs into standard electric drill chucks and comes with a replacement bit and an L - Style Hex - Key to tighten the bit. Its adjustable pivot point allows for accurate hole sizing. Weighing only 0.89 lb (0.4 kg), it's made of aluminum alloy, with an overall length of 7.2' (182.9 mm) and an overall height of 4.3' (109.2 mm).
Using this Klein hole cutter is easy. First, install it into a standard electric drill chuck. Then, adjust the pivot point according to the size of the hole you need. Mark the position on the sheet metal or ductwork where you want to cut. Turn on the drill and slowly guide the cutter through the material. Remember to wear safety goggles and gloves while using it. For maintenance, after each use, clean the cutter to remove any debris. Check the bearings regularly to ensure they're in good condition. If the bit gets dull, use the replacement bit that comes with the product. Keep the L - Style Hex - Key handy to tighten the bit when needed.
