Using the Makita VP01Z is a breeze. First, make sure you have a fully - charged 12V max CXT® Lithium - Ion battery. Insert the battery into the tool. Then, depending on whether you're polishing or sanding, select the appropriate speed using the dual - speed selector. For polishing, set it to the 0 - 2,800 RPM range, and for sanding, go for the 0 - 9,500 RPM range. Press the variable speed trigger to start the tool, and you can use the power lock - on feature for continuous operation. When using the tool, hold it with both hands. The side handle is angled to keep it away from the work surface and make it easier to control. Be careful not to press too hard on the tool, as this can damage the surface or the tool itself. After use, remove the battery to prevent any accidental starts. To keep the tool in good shape, clean it regularly. Use a soft brush to remove dust from the wire mesh air vent intake covers. Avoid using the tool in extremely wet or dusty conditions, but if you do, thanks to the Extreme Protection Technology (XPT™), it can handle it better. Check the battery's condition frequently. The Battery Protection Circuit helps prevent overloading, over - discharging, and over - heating, but it's still a good idea to keep an eye on it. If you need to change the polishing or sanding pads, use the spindle lock button to make the process easier. Remember, this tool is not compatible with 12V max pod - style tools, batteries, and chargers, so always use the right accessories.
