Milwaukee 2912-DE M18 FUEL™ HAMMERVAC™ 1 Dedicated Dust Extractor

The MILWAUKEE® HAMMERVAC™ 1-inch Dedicated Dust Extractor (2912-DE) has an inline design. It's engineered to directly connect to and get powered by the M18 FUEL™ 1-inch SDS Plus Rotary Hammers (2912-20 and 2914-20). This dust extractor uses the same replaceable certified HEPA filter as other HAMMERVACS™. This filter can trap 99.97% of all particles bigger than 0.3µm, bringing more compatibility at the jobsite. With a built-in adjustable depth stop and ruler, it enables easy and accurate adjustments. When drilling holes up to 1 inch in diameter and 6 inches in depth, this extractor fully meets OSHA Table One requirements. It features the AUTOPULSE™ Filter Cleaning Mechanism, which automatically cleans the filter after each use. This ensures better drilling performance over a longer period before you need to empty the dust box. The dust box has a vacuum port. You can use a large vacuum or another dust extractor (like the 8960-20) to suck out the dust instead of dumping it into a trash can, reducing your exposure to dust. What's included: (1) Dust Extractor with Dust Box and Filter, (1) Small Nozzle, (1) Large Nozzle. Key features are large and small dust nozzles, a HEPA filter, and it pairs well with 2912-20 and 2914-20 Rotary Hammers.

Using your Milwaukee 2912-DE Dust Extractor is easy. First, connect it directly to your M18 FUEL™ 1-inch SDS Plus Rotary Hammer (either 2912-20 or 2914-20). The built - in adjustable depth stop and ruler will help you make accurate drilling adjustments. When you start drilling, the extractor will collect the dust. After each use, the AUTOPULSE™ Filter Cleaning Mechanism will automatically clean the filter, so you don't have to worry about it too much. To empty the dust box, instead of dumping the dust, use a large vacuum or another dust extractor through the vacuum port on the dust box. This way, you'll reduce your exposure to dust. When it comes to maintenance, check the HEPA filter regularly. Replace it when it's too dirty or damaged, as it's crucial for the extractor's performance and meeting the high - efficiency dust - filtering standard. Also, keep the extractor clean and store it in a dry place when not in use.