Product Description
The Greenlee GLSS980KIT-B is a top - notch hydraulic shearing kit that comes equipped with a 30T shearing station and a 980 electric hydraulic pump. This powerful kit is hydraulically powered, using the reliable Greenlee 980 Electric Hydraulic Pump. With a 30 - ton ram, it can effortlessly and rapidly cut through tough materials like strut, threaded rod, DIN rail, Legrand, angle iron, and rebar. The laser - marked measuring system allows you to accurately shear each piece to the exact length you need, thanks to the movable arm and measuring stop. Changing dies is a breeze with the quick die change system, no tools or loose parts required. After each cut, the automatic retraction feature, with its retaining spring arm, brings the dies back to the starting position for the next cut. The material rest ensures that the material stays perpendicular, resulting in clean cuts and longer die life. Also, the hydraulic hose through - hole safely contains the hydraulic hose from the pump to the ram. Specifications: It's a hydraulic shearing kit with an operating force of 30 tons. For cutting capacity, refer to individual dies for specific die - cutting specs. The kit measures 36 - 3/8' (924.05 mm) in length and 18 - 3/8' (466.85 mm) in width.
Using the Greenlee GLSS980KIT-B is easy. First, make sure the 980 electric hydraulic pump is properly connected and powered on. Place the material you want to cut on the material rest, making sure it's perpendicular for a clean cut. Use the laser - marked measuring system to set the length you need for the cut. Then, start the hydraulic operation to activate the 30 - ton ram and shear through the material. When you need to change dies, use the quick die change system, which doesn't require any tools. After each cut, the automatic retraction will bring the dies back to the starting position for the next use. As for maintenance, regularly check the hydraulic hose in the through - hole for any signs of wear or damage. Keep the material rest clean to ensure accurate cuts. Periodically inspect the dies for sharpness and replace them if they are too dull. Always follow the safety instructions in the user manual when operating this shearing kit.
