Product Description
DETAILS: This amazing combo kit includes a 1/2' Hammer Drill / Driver (2602-20), Sawzall® Recip Saw (2620-20), a free 2686-20 M18 Brushless 4-1/2' / 5' Cut-Off Grinder with paddle switch, a 2648-20 M18 Random Orbit Sander, Circular Saw (2630-20), 1/4' Hex Impact Driver (2650-20), 4.5' Cut-Off/Grinder (2680-20), and Work Light (49-24-0171). Also comes with 2 M18™ XC High Capacity RED LITHIUM™ Batteries (48-11-1828), 1-Hour Charger (48-59-1801), Type 1 Guard, Type 27 Guard, Spanner Wrench, General Purpose SAWZALL® Blade, and Contractor Bag. FEATURES: The M18™ Cordless ½' Hammer Drill / Driver with a 4-Pole Frameless Motor gives 525 in-lbs of peak torque, 0-550/0-1,700 RPM, and 29,000 BPM. The M18™ Cordless Sawzall® Reciprocating Saw has a patented Gear-Protecting Clutch and Counter Balance Mechanism. The M18™ ¼' Hex Impact with a 4-Pole Frameless Motor offers 1400 In-lbs of torque. The M18™ Cordless 6-½' Circular Saw reaches 3,500 RPM with durable Magnesium Upper and Lower Guards. The M18™ Cordless 4-1/2' Cut-off / Grinder's 4-Pole motor runs at 9,000 RPM, with overload protection and a tool-free, burst-resistant guard for safety. The M18™ Cordless Work Light has a fold-away hook for hands-free use and a 135-degree rotating head. The DPM™ - Digital Power Management protects the tool and battery from overload. It's compatible with M18™ XC High Capacity RED LITHIUM™ Batteries and M18™ Compact RED LITHIUM™ Batteries. The M18™ Cordless LITHIUM-ION 6-tool Combo Kit offers efficient power, great weight, and top performance in the industry, powered by RED LITHIUM™ for more torque, power, and longer run-time than competitors.
Using the Milwaukee M18 6 - tool Combo Kit is easy. First, charge the M18™ XC High Capacity RED LITHIUM™ Batteries using the 1 - Hour Charger. When using the tools, make sure to wear appropriate safety gear like goggles and gloves. For the Hammer Drill / Driver, select the right bit for the job and adjust the torque settings according to the material you're working on. The Sawzall® Recip Saw is great for cutting through various materials, just place the blade firmly and start the saw. The Circular Saw needs to be held steady while cutting, and always check the depth and angle settings. When using the Grinder, use the right guard (Type 1 or Type 27) and make sure the tool is properly balanced. The Work Light can be folded and rotated to direct light where you need it. Remember, the DPM™ - Digital Power Management is there to protect the tool and battery from overloading, but don't push the tools too hard in extreme situations. After use, clean the tools with a dry cloth. Store the tools in a dry place, and keep the batteries charged if you're not going to use them for a while. Check the blades and bits regularly for wear and replace them when necessary.
