Greenlee 66PT-7/8 7/8 x 18 Nail Eater II Wood Boring Bit

Using the Greenlee 66PT - 7/8 wood boring bit is quite straightforward. First, make sure your drill is set to the appropriate speed. Insert the bit's hex shank into the drill chuck and tighten it firmly. Then, place the self - feeding screw point on the spot where you want to drill. The screw point will help draw the bit through the wood easily. When drilling, apply steady pressure, and the unique cutting angle will ensure a smooth start and reduce the cutting load. As this bit can cut through nails, you don't have to worry much about hitting nails in the wood. But still, if you feel excessive resistance, stop and check. For maintenance, after each use, clean the bit with a brush to remove sawdust and debris. You can also apply a light coat of oil to prevent rust and keep it in good working condition. Store it in a dry place to avoid damage.