Greenlee EK12IDLX11 12 Ton Crimper Indent, Li-Ion, Standard, 120V

Using the Greenlee EK12IDLX11 is a breeze. First, make sure the battery is fully charged. You can check the battery status through the LED light on the tool. To start crimping, position the wire or connector in the crimping head. Then, simply press the single trigger to control all functions of the tool. The LED display will show you important information like pressure and battery levels during operation. Remember, this tool has an Intelligent Crimping System. If the crimping force is below the set specifications, you'll get a visual and audible alert. When the crimping cycle is done, the tool will automatically retract. For maintenance, keep the tool clean and dry. The smart charger will take care of the battery, but avoid over - charging. Also, since it uses biodegradable oil, there's no need to worry about environmental impacts. If you need to crimp different wire sizes, the flip - open crimping head allows you to work on 4 AWG - 1000 kcmil copper or 6 AWG - 1000 kcmil aluminum without changing dies. Just rotate the 350° crimping head to get the best angle for your work. With the forward - positioned handle, you'll find the tool well - balanced and easy to hold. And the overmolded tacky grip makes it even more comfortable. Use the LED work light when you're in a dark area to see what you're doing clearly.