Greenlee 39903 Rope-to-Swivel Connector - 10,000 lbs. (for 39109)

The Greenlee 39903 rope-to-swivel connector is a must - have for cable pulling tasks. It can connect cable pulling ropes up to 1' (254 mm) in diameter to the pulling swivel, making the connection process a breeze. The connector comes with a removable sheave for the rope eye, adding to its functionality. When choosing, select one with a maximum rated capacity that equals or surpasses the cable puller's maximum pulling force. It has a maximum rated capacity of 10,000 lbs. (44.4 kN) in conduit or underground and 6000 lbs. (26.6 kN) overhead. With a diameter of 2' (50.8 mm) and a length of 4 - 11/16' (119 mm), it's designed for use with the 39109 swivel.

Using the Greenlee 39903 rope - to - swivel connector is easy. First, check the diameter of your cable pulling rope. It should be up to 1' (254 mm) in diameter. Then, connect the rope to the connector using the removable sheave for the rope eye. After that, attach the connector to the 39109 swivel. When doing cable pulls, make sure the maximum rated capacity of the connector meets or exceeds the cable puller's maximum pulling force. For underground or conduit pulls, the maximum capacity is 10,000 lbs. (44.4 kN), and for overhead pulls, it's 6000 lbs. (26.6 kN). Always follow these limits to avoid any damage or accidents. As for maintenance, regularly check the connector for any signs of wear or damage, especially the removable sheave. Clean it with a dry cloth if it gets dirty. If you notice any issues, replace the connector to ensure safe and efficient operation.