Product Description
DETAILS: This amazing bundle includes the 2877 - 20 M18™ Force Logic™ 750 MCM Dieless Crimper, a 2935CU - 21S M18™ Cable Stripper Kit equipped with 17 Cu THHN / XHHW Bushings, and two 48 - 11 - 1820 units. FEATURES: It comes with an M18™ RedLithium™ CP2.0 Battery, one 48 - 59 - 1812, an M18™/M12™ Multi - Voltage Charger, and a convenient carrying case. This crimper is the fastest in its class. Its lightest, in - line design along with a 180° rotating head makes alignment a breeze. The low - profile clevis and narrow nest further simplify alignment. The easy - access latch allows one - handed closing, leaving your other hand free to hold the material. You can get up to 90 crimps per charge on an M18™ RedLithium™ CP2.0 Battery when working on 600MCM Cu. The pre - crimp battery check automatically ensures there's enough charge for each crimp. A green LED instantly verifies a successful cycle. The tool records and stores every crimp for professional report building through ONE KEY™. With a POWERSTATE™ Brushless Motor and weather - protected electronics, it keeps dirt, dust, and moisture out for a longer lifespan. SPECIFICATIONS: It has a length of 18.9 inches, a height of 6.5 inches, a width of 3.3 inches, and weighs 9.02 pounds. The M18™ FORCE LOGIC™ 750 MCM Dieless Crimper offers the simplest way to crimp. It uses an industry - first Auto Distance Control technology to create cULus Classified connections under UL 486A - B for #6 - 750 MCM Cu and dual - rated connectors for seven major manufacturers. This technology enables the tool to sense contact with the connector and deliver optimal compression in a single crimp across the entire capacity range. Controlling compression by distance ensures a uniform crimp appearance for easy installation in tight panels. With Milwaukee® ONE - KEY™ Technology, you can store real - time crimp data, generate professional reports, view historical tool performance data, and sync it all wirelessly to the cloud. The combination of a POWERSTATE™ Brushless Motor, REDLINK™ Electronics, and REDLITHIUM™ Batteries guarantees unmatched reliability in tough conditions. The kit includes two M18™ REDLITHIUM™ CP2.0 Batteries, an M18™ and M12™ Multi - Voltage Charger, and a carrying case.
Using your Milwaukee M18 Dieless Crimper 2877 - 22 is a piece of cake. First, make sure your M18™ RedLithium™ CP2.0 Battery is fully charged. You can use the pre - crimp battery check to ensure there's enough juice for the job. When you're ready to crimp, place the connector and the material in the crimper's nest. Thanks to the easy - access latch, you can close the crimper with one hand, leaving the other hand free to hold the material steady. The 180° rotating head and in - line design help you align the crimper easily. Once you start the crimping process, the Auto Distance Control technology will ensure optimal compression. A green LED will let you know if the crimp was successful. After you're done with your work, use the ONE KEY™ technology to store the crimp data and generate professional reports. As for maintenance, keep the crimper clean and dry. The weather - protected electronics are designed to keep dirt, dust, and moisture out, but it's still a good idea to wipe it down after use. Also, make sure to charge the batteries regularly and store them in a cool, dry place. Don't forget to check the charger and the battery for any signs of damage before each use.
