Milwaukee 2623-20 M18 3-1/4 Planer (Tool Only)

Using the Milwaukee 2623-20 M18 3-1/4 Planer is easy. First, make sure you've installed the bevel/edge guide and double - edge carbide blades properly. Then, adjust the depth adjustment dial according to the thickness of the wood you're working on. You can choose a depth between 0 and 5/64 inches in a single pass, and there are 20 locking positions for precise control. When using the planer, turn it on and let the powerful 14,000 RPM motor do its job. You can select the left or right chip exhaust direction using the chip ejection switch to keep the work area clean and safe. For bevel, rabbet, or straight cuts, use the bevel/edge guide to achieve the desired angle, up to 45 degrees. Remember to always wear safety goggles to protect your eyes from flying chips. As for maintenance, after each use, clean the planer thoroughly to remove sawdust and debris. Check the blades regularly for wear and replace them when necessary. Keep the planer in a dry place to prevent rust. This tool comes with a 5 - year warranty, but following these steps will help it last even longer and perform at its best.