Using the Makita XTR01Z router is quite straightforward. First, make sure you have a fully - charged 18V LXT Lithium - Ion battery (sold separately) and insert it into the tool. Then, select the right 1/4' shank router bit for your project. You can use the shaft lock to change bits quickly and easily. Adjust the speed using the variable speed control dial (10,000 - 30,000 RPM) based on the material and task at hand. The electronic speed control will keep the speed constant under load, and the soft start feature will give you a smooth start. Use the rack - and - pinion fine depth adjustment system to set the cutting depth precisely. The dual L.E.D. lights will help you see the work area clearly. If you need to change the base, use the quick release cam lock system. You can also attach an optional dust nozzle to connect it to a Makita vacuum cleaner for better dust extraction. When it comes to maintenance, after each use, clean the router to remove dust and debris. Check the bits for wear and tear and replace them if necessary. Store the router in a dry place, and keep the battery charged properly to ensure its long - term performance. Remember, always wear appropriate safety gear like goggles and ear protection when using the router.
