Greenlee 847 1/2-6 Electric PVC Heater/Bender (Non-Motorized)

Using the Greenlee 847 is a breeze. First, preheat it for 10 minutes. Then open the lid, put your 1/2 - 6 inch PVC pipe inside, close the lid, and rotate it until the PVC gets soft. After that, open the lid and take out the pipe to bend it as you like. When heating shorter pipes, you can leave one of the double doors open. Remember to use a 230 VAC, 30 Amp power source or a 7000 - watt generator. This heater weighs 78 lbs, so be careful when moving it around. For maintenance, keep the reflective interior clean to ensure efficient heating. Also, check the 30908 Calrod Heating Element regularly to make sure it's working properly. Always turn off the heater using the on/off switch with the indicator light when you're done using it.