Greenlee 60001 Square Punch Assembly 1/2

The Greenlee 60001 Square Punch Assembly is a high - quality tool designed for punching holes in mild steel. This set includes a Punch 60002, a Die 60003, a Draw Stud 60115, a Drive Nut 60120, and a Counter Nut 05244. It has a maximum capacity for 16 - gauge mild steel and offers both hand and hydraulic operation types. The square punch creates holes that are 0.500 inches by 0.500 inches (12.7mm x 12.7mm), and it requires a minimum pilot hole of.375 inches. An optional adapter for a hydraulic driver, the 60114, is available but sold separately.

Using the Greenlee 60001 Square Punch Assembly is quite straightforward. First, make sure you have a pilot hole that's at least.375 inches in size on your 16 - gauge mild steel material. Then, assemble the punch, die, draw stud, drive nut, and counter nut as described in the included instructions. You can operate it by hand for smaller jobs or use a hydraulic driver with the optional 60114 adapter for more force. When using the hydraulic option, ensure the adapter is properly attached. As for maintenance, after each use, clean the punch and die to remove any metal shavings. Store the assembly in a dry place to prevent rusting. If you notice any signs of wear on the punch or die, it might be time to replace them to ensure consistent performance.