Greenlee 7212SP-3/4P SPEED PUNCH 3/4 Conduit Punch

Operator's Manual. This Greenlee SPEED PUNCH is up to 3 times faster, helping you save both time and money with every punch. Its no-thread design gets rid of cross-threading issues. It's suitable for steel (up to 10 gauge), aluminum, fiberglass, and plastic. You can use it with hydraulic and battery-powered drivers. But remember, it must be used with other SPEED PUNCH System components. Size: 3/4' (19 mm).

Using this Greenlee SPEED PUNCH is easy. First, make sure you have all the necessary SPEED PUNCH System components ready. Then, choose the right material - it works great with steel up to 10 gauge, aluminum, fiberglass, and plastic. You can power it with either a hydraulic or a battery - powered driver. When punching, you'll notice it's much faster, so be prepared for quick work and time savings. As for maintenance, keep it clean after each use. Check for any signs of wear, especially the punching parts. If you see cross - threading (even though the design minimizes this), it might be time to inspect and replace parts. And always follow the operator's manual for detailed instructions.