Greenlee 0159-23 Jouneyman's Metric Tool Kit 21 piece

The Greenlee 0159 - 24 metric tool kit is an ideal set for both professional electricians and apprentices. It comes with a wide range of high - quality tools. Included are 9 - inch high - leverage side - cutting pliers with molded grips, 8 - inch high - leverage diagonal cutting pliers with molded grips, and 8 - inch high - leverage long nose pliers with side - cutting and molded grips. There's also a 10 - inch pump pliers with a dual NM cable ripper and molded grip. The kit features heavy - duty screwdriver tips in various sizes, a 7.5 - meter tape measure, an 18 - oz electrician's hammer, a 20 - pocket tool caddy, a voltage tester, a Pro Plus wire stripper for 10 - 18 AWG wires, a stripping/crimping combination tool, a cable cutter, a torpedo level, a 4 - piece squaredrive (Robertson) set, and square tip drivers in different sizes. This comprehensive kit is a must - have for any electrical work.

Using this Greenlee tool kit is a breeze. For the pliers, just open the jaws and place the wire or object you want to cut or grip. Then, squeeze the handles firmly. When using the screwdrivers, select the right tip size for the screw, insert it into the screw head, and turn it clockwise to tighten or counter - clockwise to loosen. The tape measure can be pulled out to measure distances, and the torpedo level can be placed on a surface to check if it's level. The voltage tester should be used carefully. Always make sure to test it on a known live source before using it on an unknown one. As for the cable ripper and cutter, place the cable in the appropriate slot and apply pressure to cut or rip it. When it comes to maintenance, keep the tools clean after each use. Wipe off any dirt or debris with a dry cloth. For the metal parts, you can apply a little bit of lubricant to prevent rust. Store the tools in the provided 20 - pocket tool caddy to keep them organized and protected.