Makita XGC01ZB 18V LXT Li-Ion Crdls 20 oz Sausg Caulk and Adhsv Gun Bare

FEATURES: The Makita - built motor provides 1,100 lbs of dispensing force, capable of handling high - viscosity adhesives and sealants. With a 5 - speed dial, you can set the flow rate anywhere from 0 to 66 IPM. The variable - speed trigger enables you to adjust the speed according to the task. The 360° rotatable cartridge holder can accommodate 20 oz cartridges, sausage packs, and bulk caulk and adhesives. Three pistons are included for different materials. The drip - reduction feature automatically releases pressure on the material when you let go of the trigger, preventing accidental dispensing. An overload indicator light warns you when the tool is close to overloading, reducing the risk of sealant cartridge breakage. SPECIFICATIONS: Capacity for caulk or sealants is 20 oz. Dispense force is 1,100 lbs. Variable speed ranges from 0 to 66 IPM. There are 5 speed settings. It runs on an 18V LXT® Lithium - Ion battery. Overall length is 21 - 1/4 inches. Net weight is 6 lbs, and shipping weight is 16 lbs.

Using this Makita caulk and adhesive gun is a breeze. First, make sure your 18V LXT® Lithium - Ion battery is fully charged. Insert the appropriate cartridge, sausage pack, or bulk material into the 360° rotatable cartridge holder. Use the 5 - speed dial to set the flow rate according to your project needs. Squeeze the variable - speed trigger to start dispensing the caulk or adhesive. Remember, you can adjust the speed while using it to match the application. When you're done, release the trigger, and the drip - reduction feature will prevent any extra material from coming out. Regarding maintenance, keep the gun clean after each use. Wipe off any excess caulk or adhesive. Check the pistons regularly for wear and tear. If the overload indicator light comes on, stop using the tool immediately to avoid damaging the sealant cartridge. Store the gun in a dry place to extend its lifespan.