Discover JET's outstanding 18 - inch scroll saw. This machine combines top - notch features, innovation, and a well - thought - out design, fulfilling your long - awaited expectations. The real highlight is its blade change process. Our exclusive upper mechanism simplifies the task by clamping and tensioning the blade in a single step. The toolless lower blade holder is not only removable but also attaches firmly and quickly. The table, with a slot for the blade, is a 11 - 5/8' x 21' 1/4' thick steel surface, providing a stable workspace and minimizing vibrations. With an 18 - inch throat capacity, an arm that tilts 45° to the right and 30° to the left, this saw ensures the work table stays flat for precise cutting. It comes fully equipped with features like a variable speed range of 400 – 1550 strokes per minute, a top - lift spring - loaded arm that raises 10' and stays up until pulled down, an integrated blade storage with slots for pre - loaded blades and a built - in wrench, and a removable dust port under the table to capture dust at the source. Included in the package are one scroll saw, one material hold - down, one extra lower blade holder, and one onboard dust blower.
Using this Jet scroll saw is a breeze. First, if you need to change the blade, thanks to the exclusive upper mechanism, you can clamp and tension the blade in one go. The toolless lower blade holder can be quickly removed and re - attached. Make sure to use the slotted table to simplify the blade - changing process. When using the saw, adjust the variable speed according to your material and the type of cut you want. You can choose a speed between 400 and 1550 strokes per minute. For angled cuts, tilt the arm up to 45° to the right or 30° to the left while keeping the work table flat. Keep in mind that the steel table is thick and heavy, which provides stability but also means it's not very portable. When you're done using the saw, use the removable dust port under the table to clean up the dust. For maintenance, regularly check the blade storage and make sure the pre - loaded blades are in good condition. Also, use the built - in wrench to keep the blade properly tightened. Store the saw in a dry place to prevent rusting.
