Product Description
Details: This incredible kit includes the M18™ Force Logic™ 750 MCM Dieless Crimper (model 2877 - 20), a 2829 - 22 M18 FUEL Compact Band Saw Kit, and two 48 - 11 - 1820 units. Features: It comes with an M18™ RedLithium™ CP2.0 Battery, one 48 - 59 - 1812, an M18™/M12™ Multi - Voltage Charger, and a convenient carrying case. This crimper is the fastest dieless one around. Its lightest in - line design and 180° rotating head make alignment a breeze. The low - profile clevis and narrow nest also contribute to easy alignment. The easy - access latch and one - handed close feature allow you to use your second hand to hold the material. On a M18™ RedLithium™ CP2.0 Battery, you can get up to 90 crimps per charge on 600MCM Cu. The pre - crimp battery check automatically ensures there's enough charge for each crimp. The green LED gives instant verification of a successful cycle. Through ONE KEY™, the tool records and stores every crimp for professional report building. With a POWERSTATE™ Brushless Motor and weather - protected electronics, it keeps dirt, dust, and moisture out, ensuring a longer life. Specifications: It has a length of 18.9 inches, a height of 6.5 inches, a width of 3.3 inches, and weighs 9.02 pounds. The M18™ FORCE LOGIC™ 750 MCM Dieless Crimper offers the simplest way to crimp. Using the industry - first Auto Distance Control technology, it produces cULus Classified connections under UL 486A - B for #6 - 750 MCM Cu and dual - rated connectors for seven major manufacturers. This technology enables the tool to sense when it contacts the connector and deliver optimal compression with a single crimp across the whole capacity range. Controlling compression by distance gives a uniform crimp appearance for easy installation in tight panels. With Milwaukee® ONE - KEY™ Technology, you can store real - time crimp data, generate professional reports, view historical tool performance data, and sync it all wirelessly to the cloud. The combination of a POWERSTATE™ Brushless Motor, REDLINK™ Electronics, and REDLITHIUM™ Batteries ensures unmatched reliability in tough conditions. The kit also includes two M18™ REDLITHIUM™ CP2.0 Batteries, an M18™ and M12™ Multi - Voltage Charger, and a carrying case.
Using your Milwaukee M18 750 MCM Dieless Crimper is easy. First, make sure the battery is fully charged. You can use the pre - crimp battery check to ensure there's enough power for each crimp. Then, select the appropriate connector for your task. Place the connector and the material in the crimper's nest. Use the one - handed close feature to start the crimping process. The green LED will tell you if the crimp is successful. For the band saw in the kit, follow the normal procedures for using a band saw, like adjusting the blade and securing the material. When it comes to maintenance, keep the crimper clean. The weather - protected electronics help keep dirt and dust out, but it's still a good idea to wipe it down after use. Check the battery regularly and store it in a cool, dry place. If you're not using the tool for a long time, remove the battery. Also, make sure to keep the tool in the provided carrying case to protect it from damage.
