Product Description
The JET® SSC Series electric hoists blend safety and durability for commercial and industrial use. These hoists come with a slip clutch overload protection system, which stops the hoist from lifting loads that exceed its rated capacity. They are available in single or three-phase options to meet your electrical requirements. Single-phase models have a thermal overload protection to prevent overheating, while three-phase models feature a reverse phase relay to protect against incorrect wiring. The well - proven DC electro - magnetic brake enhances safety by holding the load even during power outages. The maintenance - free gear train with a sealed oil bath ensures long - lasting performance. The JET® SSC series offers hoists with capacities from ½ ton to 5 tons and standard lifts of 10, 15, and 20 feet (custom lifts are also available). Key features include: Safety: Overload protection with a slip clutch design, thermal overload protection for low - voltage situations, a reliable DC electro - magnetic brake, and upper and lower limit switches. Durability: A sealed gear train, grade 80 black oxide coated load chain, a 24 - volt push - button control pendant with a cable strain relief system, and all - steel construction with a powder - coat finish to keep out moisture, dust, and debris. Specifications: Headroom is 24 - 7/16 inches, lift is 15 feet, number of falls is 1, motor power is 1 - 3/4 HP, lifting speed is 19 FPM, duty cycle is 25%, load chain dimensions are 8 x 24 mm, motor phase is single - phase, motor voltage is 115 / 230 V, load capacity is 1 ton, and duty cycle rating is H3.
Using your Jet electric chain hoist is straightforward. First, make sure the power supply matches the motor phase and voltage specified in the product's specifications. Before lifting, check that the load is within the hoist's rated capacity. Use the 24 - volt push - button control pendant to operate the hoist, but be careful not to let the load chain over - travel as the upper and lower limit switches are there to protect you. When it comes to maintenance, the sealed gear train with an oil bath means you don't have to do much, but still, it's a good idea to check the load chain regularly for any signs of wear and tear. If you notice any issues with the thermal overload protection or the electro - magnetic brake, stop using the hoist immediately and get it checked by a professional. Keep the hoist clean and dry, and store it in a place where it won't be exposed to excessive moisture, dust, or debris.
