The Milwaukee M18 FUEL High-Speed Chain Snake for 1.5 - 4 inch pipes offers quick setup and strong descaling power. It can descale up to 75 feet away, delivering full power even at the maximum distance. With an infinite variable speed, an electronic foot pedal, and a mechanical clutch, it provides the easiest and most controlled wall-to-wall cleaning. You don't have to worry about extension cords, finding electrical outlets, or unreliable drill connections as it can get power anywhere. The two included M18 REDLITHIUM High Output HD 12.0 Battery Packs allow the tool to clear 150 feet of scale build-up per charge. It comes with 1.5, 2, 3, and 4 inch standard chain knockers to remove grease and soft blockages. There are also additional accessories available like 1.5, 2, 3, 4 inch carbide heads and a grease penetrating head.
Using this Milwaukee M18 FUEL High-Speed Chain Snake is easy. First, make sure the battery packs are fully charged. Then, choose the appropriate chain knocker according to the pipe size. Connect the chain knocker to the cable and insert it into the pipe. Use the electronic foot pedal to control the speed. You can adjust the variable speed dial for a more controlled cleaning experience. When the cable gets stuck, the mechanical clutch helps prevent damage. After use, clean the cable with the partially enclosed drum for easy cleaning. Store the tool in a dry place and check the battery packs regularly. Replace the battery packs when they no longer hold a charge. Also, check the accessories for wear and tear and replace them if necessary.
