Greenlee 39902 Rope-to-Swivel Connector - 10,000 lbs. (for 39110)

The Greenlee 39902G rope-to-swivel connectors are a great solution for cable pulling. These connectors can link a cable pulling rope with a diameter of up to 1' (254 mm) to the pulling swivel, making the connection process much easier. They come with a removable sheave for the rope eye. When choosing a connector, make sure to pick one with a maximum rated capacity that meets or exceeds the cable puller's maximum pulling force. The maximum rated capacity in conduit or underground is 10,000 lbs. (44.4 kN), while the maximum rated capacity overhead is 6000 lbs. (26.6 kN). The connector has a diameter of 2' (50.8 mm) and a length of 4 - 11/16' (119 mm), and it's designed for use on the 39110 swivel.

Using the Greenlee 39902G rope-to-swivel connector is easy. First, check that the rope's diameter is up to 1' (254 mm). Then, connect the rope to the connector using the removable sheave for the rope eye. Next, attach the connector to the 39110 swivel. When using it, always ensure that the maximum rated capacity of the connector meets or exceeds the cable puller's maximum pulling force. For underground or conduit use, don't exceed 10,000 lbs. (44.4 kN), and for overhead use, the limit is 6000 lbs. (26.6 kN). As for maintenance, regularly inspect the connector for any signs of wear or damage. Keep it clean and dry to prevent rust and corrosion. If you notice any issues, replace the connector to ensure safe and efficient operation.