This Klein 1672-10 Knurled Jaw Grip comes with a single knurled jaw grip. It has several great features. The longer jaws firmly hold the cable, minimizing slippage and cable damage. The design includes a latch and a large - diameter eye that can fit large hooks on hoists, winches, and tackle blocks. When the latch is shut, it helps keep the cable in place within the grip jaws. It's similar to Cat. No. 1671 - 10 but with knurled jaws. The grip is ideal for wire pulling. It can handle aircraft, messenger, and guy strand cables with diameters from 0.37' to 0.75' (9.40 to 19.05 mm). The double V - serrated jaws are 4.375' (111.1 mm) long. It has a maximum safe load of 10,000 lb (4536 kg) and weighs 4.4 lb (2.0 kg). Klein Tools 1671 - 10 Parallel Jaw Grip works well with various cable types and sizes. The knurled, longer jaws offer a tight hold, reducing the risk of slippage and deformation. All Klein grips are made from custom drop - forged steel, machined and heat - treated for long - lasting durability. Each grip is individually hand - inspected and actuated for proper operation. They are also thoroughly tested to the rated load for top - notch quality and reliability.
Using this Klein Knurled Jaw Grip is straightforward. First, make sure the cable diameter is within the range of 0.37' to 0.75' (9.40 to 19.05 mm). Place the cable between the double V - serrated jaws. Close the latch to keep the cable in position. When using it with hoists, winches, or tackle blocks, attach the large - diameter eye to the appropriate hook. Be careful not to exceed the maximum safe load of 10,000 lb (4536 kg). If the load is too heavy, it can cause damage to the grip and pose a safety risk. For maintenance, keep the grip clean and dry. After use, check for any signs of wear or damage. If you notice any issues, don't use the grip until it's been inspected and repaired. Periodically lubricate the moving parts to ensure smooth operation.
