DeWalt DCS577X1 Flexvolt 60V MAX 7-1/4 Cordless Worm Drive Style Saw (9.0Ah Battery)

Using the DeWalt DCS577X1 is a breeze. First, charge the 9.0Ah battery with the included rapid charger. Once charged, insert it into the saw. Hold the rear handle firmly and use the clear line of sight to position the blade where you want to cut. When you're ready, squeeze the trigger. The saw's high - speed motor will start, and the blade will rotate at 5800 RPM. The integrated dust blower will keep your view clear. You can adjust the bevel angle up to 53° for different cutting needs. Just set it at the stops of 22.5°, 45°, or 53°. After you're done cutting, release the trigger, and the electronic brake will quickly stop the blade. For safety, always wear appropriate protective gear like safety glasses and gloves. When not in use, store the saw in the contractor bag. Keep the blade sharp and clean. If you need to change the blade, use the onboard - stored blade wrench. Periodically check the battery and the charger for any signs of damage. And remember, this saw is for wood cutting only, not for metal.