Greenlee 7606SB 1/2 to 2 Slug Buster KO Set with 1725 Foot Pump in Steel Case

The Greenlee 7606SB Slug Buster KO Set is a game - changer in the electrical tool industry. Its foot - operated design is a major advantage, allowing you to use both hands to precisely position the punch. This set punches holes at a speed that's 10 times faster than the traditional wrench method, saving you a significant amount of time. It's not just limited to punching; it can also drive the 751 cable cutter head, adding to its versatility. With an 11 - Ton powerful hydraulic ram, it can handle tough jobs with ease. What's included in the set? You'll get a driver, a foot pump, slug - buster punches, dies and draw studs suitable for 1/2' - 2' conduit, all neatly packed in a steel case for protection and easy transportation.

Using the Greenlee 7606SB Slug Buster KO Set is a breeze. First, make sure the foot pump is properly connected to the driver. Then, place the slug - buster punch and the appropriate die on the material where you want to make a hole. Use your foot to operate the pump, which will free up both hands to position the punch accurately. Keep in mind that since it has an 11 - Ton hydraulic ram, it can generate a lot of force, so always ensure that the material is firmly held in place to avoid any accidents. When using it to drive the 751 cable cutter head, follow the same basic steps but adjust according to the cutter head's requirements. For maintenance, after each use, clean the punches, dies, and the ram to prevent debris build - up. Store the set in its steel case to protect it from damage and keep it in a dry place to avoid rusting. Also, check the hydraulic fluid level regularly and top it up if needed.