The Greenlee 7806SB is a remarkable hydraulic punch driver kit. It comes with a wide range of punches and dies for different conduit sizes. For example, it has 1/2' conduit size punches and dies with a 7/8' hole size, 3/4' conduit size ones with a 1.115' hole size, and so on up to 2' conduit size with a 2 - 3/8' hole size. The kit also includes a Quick Draw Hydraulic Punch Driver, draw studs, spacers, stud adapters, and a plastic case. This kit stands out for its compact and lightweight design, making it highly portable and allowing for fast and easy one - person operation. It can generate 8 tons of hydraulic force, enabling effortless punching even in 10 - gauge stainless steel, depending on the individual punch capacities. The Quick Draw feature is ideal for fast, straight - on front panel punching, while the Quick Draw Flex offers unlimited driver orientation, simplifying access to the work area. Moreover, it can be used with non - round punches within the tool's capacity (an adapter may be needed).
Using the Greenlee 7806SB is quite straightforward. First, select the appropriate punch and die for the conduit size you're working with. Install them onto the Quick Draw Hydraulic Punch Driver. Make sure to position the conduit correctly under the punch and die. Then, operate the driver to generate the hydraulic force and punch the hole. When using the Quick Draw Flex, adjust the driver's orientation as needed for better access to the work area. Remember to check the individual capacities of the punches before starting to ensure you're using them within their limits. If you're using non - round punches, an adapter might be required, so double - check that. As for maintenance, keep the punches and dies clean after each use to prevent rust and damage. Store the kit in the provided plastic case in a dry place to protect it from the elements. If you notice any issues with the hydraulic system or the punches, have them inspected and repaired by a professional.
