Greenlee 61007 Square Punch Assembly 3/4

The Greenlee 61007 Square Punch Assembly is a high - quality tool designed for working with mild steel. It comes with a punch, a die, a Draw Stud 34421, a Drive Nut 34733, and a Counter Nut 04638. This assembly can handle 14GA mild steel, offering a maximum capacity for mild steel work. It features a square punch and can be operated either by hand or hydraulically. An optional adapter for the hydraulic driver, the 33967, is available but sold separately. The hole size it creates is 0.750' x 0.750' (19.1mm x 19.1mm), and it requires a minimum pilot hole of.500'.

Using the Greenlee 61007 Square Punch Assembly is straightforward. First, make sure you have a 0.500' pilot hole in your 14 - gauge mild steel. Then, use the punch and die included in the set. You can operate it by hand if you prefer, or use a hydraulic driver with the optional 33967 adapter (which you need to buy separately). When using the hydraulic option, follow the safety instructions of the hydraulic device. As for maintenance, after each use, clean the punch, die, draw stud, drive nut, and counter nut. Keep them dry to prevent rusting. Store the assembly in a cool, dry place. Avoid using it on materials thicker than 14 - gauge mild steel as it may damage the tool.