Product Description
The Greenlee DTAPM8C drill/tap bit offers outstanding performance. It comes with (1) drill/tap bit. This amazing tool allows you to complete hole drilling, tapping, deburring, and countersinking in a single operation using a power drill, which saves both labor and time. Its design features a back - taper beyond the tap to stop thread damage from over - drilling. There's also a deburr/countersink on the bit beyond the back taper. Made from hardened high - speed steel instead of carbon steel, it has a longer lifespan. The high - quality hex shank guarantees a strong connection to the drill chuck. It's designed to tap metal up to 10 - gauge. Specifications include a size of M8 x 1.25, suitable for material thickness up to 10 gauge. It can work on mild steel, copper, brass, and aluminum. The shank is a 1/4' quick - change hex, and the drill material is high - speed steel with a split point and web thinning for the drill point.
Using the Greenlee DTAPM8C drill/tap bit is easy. First, make sure your power drill is properly set up and the chuck is tightened around the 1/4' quick - change hex shank. Then, select the appropriate material you want to work on, like mild steel, copper, brass, or aluminum, as long as it's up to 10 - gauge thick. Start the drill and guide it gently to the spot where you want to drill and tap. The bit will do all the work of drilling, tapping, deburring, and countersinking in one go. When using, don't apply too much pressure as the back - taper design helps prevent thread damage from over - drilling. After use, clean the bit with a brush to remove any metal shavings. Store it in a dry place to prevent rust. If you notice any signs of wear, it might be time to replace the bit for continued good performance.
