Greenlee EK210L11 Gator Plus Terminal 1.5-Ton Battery L Series Crimping Tool

FEATURES: • The hydraulic pump of this tool is designed to be super compact and battery - powered, perfect for crimping terminals and DSV connectors. • Its linear crimping action creates a perfectly symmetric crimp. • A single battery charge allows you to complete around 400 crimps. • You can retract the ram during the cycle to adjust the connector. • The crimping head can rotate a full 360 degrees. • It uses all Kwik Cycle 9 Crimping Dies. • The advanced 18V lithium - ion battery reduces cycle time and gives 70% more cycles per charge. In - line tools come with a 1.5 amp - hour battery. • All tools are equipped with an integrated LED light to brighten up the work area. SPECIFICATIONS: • Crimping Die Style: Kwik Cycle 9 • Crimping Force: 2,900 lbs. (13 kN) • Length: 12 - 3/4” (324 mm) • Width: 2 - 7/8 (73 mm) • Depth: 4 - 1/2” (114 mm) • Weight: 3 - 1/2 lbs. (1.6 kg) • Battery: 18V 3.0 Ah Li - ion • Est. Cycles per Charge: 400 • Compatible with Greenlee 52176 and 52177 Batteries

Using this crimping tool is easy. First, make sure the battery is fully charged. Then, select the appropriate Kwik Cycle 9 Crimping Die for your terminal or DSV connector. Place the connector in the crimping head. You can rotate the head to get the best angle. Start the crimping process. If you need to adjust the connector, you can retract the ram in the middle of the cycle. When using, always keep the work area well - lit with the built - in LED light. As for maintenance, after each use, wipe the tool clean to remove any dirt or debris. Check the battery regularly. If it's running low, recharge it. Store the tool in a dry place to prevent damage. Also, make sure to use only compatible Greenlee 52176 and 52177 batteries to avoid any issues.