Using the Greenlee CM-1560 is quite straightforward. First, insert the 1.5V AA batteries into the meter. To measure current, just open the clamp jaw and place it around the conductor. For voltage measurement, you can use the test leads or the non - contact mode. When working in dark areas, turn on the flashlight inside the clamp jaw. To get accurate readings on variable frequency drives, make sure to use the digital low - pass filter. When testing continuity and diodes, follow the normal testing procedures. Always remember to hold the data when you get the reading you need. As for maintenance, keep the meter clean and dry. After use, put it back in the carrying case. Don't expose it to extreme temperatures or humidity. If there are any issues, check the batteries first. If the problem persists, it might be time to seek professional help.
