Using the Makita XRH011TWX is easy. First, make sure your 18V LXT® Lithium-Ion 5.0Ah battery is fully charged. You can check the charge level on the integrated L.E.D. indicator. Then, attach the side handle and depth gauge according to your needs. Insert the appropriate SDS-PLUS bit into the tool. When you're ready to start drilling, hold the tool firmly with both hands. Use the variable speed trigger to adjust the speed based on the task at hand. The HEPA Dust Extractor Attachment will start working as soon as you pull the trigger. It'll suck up the dust and direct it to the clear dust container. Keep an eye on the container level indicator. When it's full, release the trigger, and the vacuum motor will keep running for 2 seconds to collect any remaining dust. Then, quickly detach the container and empty it. This way, you can maintain good dust suction efficiency. Remember, the torque-limiting clutch is there to protect the gears. If the bit gets stuck, the clutch will disengage the gears automatically. For maintenance, after each use, clean the tool with a dry cloth. Periodically check the HEPA filters. Replace them after about 200 container fillings. Also, make sure to store the tool in a dry place. And when charging the battery, use the 18V LXT® Lithium-Ion Rapid Optimum Charger. It communicates with the battery's built-in chip to optimize battery life and has a built-in fan for faster charging. Always follow safety precautions when using power tools. Wear safety glasses and appropriate clothing to protect yourself from dust and debris.
