Greenlee 925-7/8 Ultra Cutter 7/8 Hole Size

Greenlee 925-7/8 Details:
• Ultra cutter with a 7/8-inch (22.5 mm) hole size, suitable for 1/2-inch conduit and 5/8-inch copper pipe.
• Requires the 925-011 arbor (not included).
• Ideal cutting speed for the 7/8-inch (22.5 mm) cutter is 350 RPM.

Greenlee 925-7/8 Advantages:
• Outlasts standard hole saws by up to 10 times.
• Precision-ground teeth make it a breeze to cut smooth, burr-free holes.
• Has a 1/4-inch (6.35 mm) capacity.
• Offers great durability and speed, resulting in a low cost per hole.
• The split-point pilot drill stops the cutter from 'walking', ensuring accurate hole placement.
• The spring-loaded slug ejector saves you time.
• No tools are needed to change cutter sizes.
• The solid, high-speed steel saw body reduces the risk of broken teeth.

Using the Greenlee 925-7/8 Ultra Cutter is quite straightforward. First, make sure you have the 925-011 arbor (which isn't included with the cutter). Attach it to your power tool. Set your tool to the recommended cutting speed of 350 RPM for the 7/8-inch cutter. When starting to cut, the split - point pilot drill will help you place the hole accurately. Just press the cutter against the material and start the tool. The precision - ground teeth will smoothly cut through, leaving a burr - free hole. After cutting, the spring - loaded slug ejector will quickly remove the slug, saving you time. When you need to change the cutter size, you don't need any tools. Just make the switch. As for maintenance, after each use, clean the cutter to remove any debris. Store it in a dry place to prevent rust. Also, be careful not to overload the cutter as it can cause damage to the teeth or the saw body. If you notice any signs of wear, it might be time to replace the cutter to ensure continued high - quality performance.