This DeWalt DCS551B cut-out tool comes as a standalone unit. It features a high - speed 26,000 RPM motor that can quickly cut through drywall, acoustical ceiling tiles, plywood and more. The tool - free bit change mechanism enables you to swap bits fast and easily without a wrench. A dust - sealed switch protects the tool from dust intake, ensuring a longer service life. There's also a bright LED that lights up dark work areas for precise cutting. Specifications include a 20V MAX voltage, a no - load speed of 26,000 RPM, collet diameters of 1/4' and 1/8', an adjustable guide, a spindle lock, a tool weight of 2.2 Lbs., and a tool length of 9 - 3/4'.
Using this DeWalt drywall cut - out tool is a breeze. First, make sure the tool is switched off and unplugged (since it's cordless, remove the battery) before you do any bit changes. You can use the tool - free bit change feature to quickly swap bits according to your cutting needs. When you're ready to cut, hold the tool firmly, turn on the LED light to illuminate the work surface, and then start the motor. The adjustable guide helps you make straight and accurate cuts. As for safety, always wear safety goggles to protect your eyes from debris. Keep your hands away from the cutting area while the tool is running. For maintenance, after each use, clean the tool to remove dust. You can use a soft brush to clean the exterior and the dust - sealed switch. Check the bits regularly for wear and tear, and replace them when necessary. Store the tool in a dry place and keep the battery charged for optimal performance.
