Greenlee 925-1-1/8 Ultra Cutter 1-1/8 Hole Size

Greenlee 925-1-1/8 Specs:
• Ultra cutter with a 1-1/8' (28.6 mm) hole size and 3/4' conduit size
• Needs a 925-011 arbor (not included).
• Ideal cutting speed: 270 RPM for the 1-1/8' (28.6 mm) cutter

Greenlee 925-1-1/8 Advantages:
• Lasts ten times longer than regular hole saws.
• Sharp, precision-ground teeth effortlessly cut smooth, burr-free holes.
• Has a 1/4' (6.35 mm) capacity.
• Offers durability and speed, resulting in low cost per hole.
• The split-point pilot drill stops 'walking' and makes accurate hole placement a breeze.
• The spring-loaded slug ejector saves you time.
• You don't need any tools to change cutter sizes.
• Lower risk of broken teeth as the saw body is made from solid, high-speed steel.

Using the Greenlee 925-1-1/8 Ultra Hole Cutter is easy. First, make sure you have the 925-011 arbor (it's not included, so you'll need to get it separately). Set your drill to the recommended speed of 270 RPM when using the 1-1/8' cutter. Place the cutter on the material where you want to make the hole. The split - point pilot drill will help you place the hole accurately. When you start drilling, the precision - ground teeth will cut through the material smoothly, leaving a burr - free hole. After cutting, the spring - loaded slug ejector will quickly remove the slug, saving you time. Remember, you can change the cutter sizes without any tools. As for maintenance, keep the cutter clean after each use. Wipe off any debris and store it in a dry place. Since the saw body is made of solid, high - speed steel, it's quite durable, but still handle it with care to avoid any damage to the teeth.